Publication

Journals

1. W. Chen, C. A. Balanis and C. R. Birtcher, Checkerboard EBG Surfaces for Wideband Radar Cross Section Reduction,” IEEE Trans. Antennas Propagat., Vol. 63, No. 6, June 2015, pp. 2636-2645.

2. S. Pandi, C. A. Balanis and C. R. Birtcher, “Design of Scalar Impedance Holographic Metasurfaces for Antenna Beam Formation With Desired Polarization,” IEEE Trans. Antennas Propagat., Vol. 63, No. 7, July 2015, pp. 3016-3024.

3. M. Askarian Amiri, C. A. Balanis and C. R. Birtcher, “Analysis, Design and Measurements of Circularly Symmetric High Impedance Surfaces for Loop Antenna Applications,” IEEE Trans. Antennas Propagat., Vol. 64, No. 2, February 2016, pp. 618-629.
4. A. Modi and C. A. Balanis, “PEC-PMC Baffle inside Circular Cross Section Waveguide for Reduction of Cut-off Frequency,” IEEE Microwave and Wireless Components Letters, Vol. 26, Issue 3, pp. 171-173, 2016.

5. S. Pandi, C. A. Balanis and C. R. Birtcher, “Analysis of Wide Band Multi-layered Sinusoidally Modulated Metasurface,” IEEE Antennas and Wireless Propagation Letters, Vol. 15, pp. 1491-1494, 2016.

6. S. Saeed, C. A. Balanis and C. R. Birtcher, “Inkjet-Printed Flexible Reconfigurable Antenna for Conformal WLAN/WiMAX Wireless Devices,” IEEE Antennas and Wireless Propagation Letters, Vol. 15, pp. 1979-1982, 2016.

7. W. Chen, C. A. Balanis and C. R. Birtcher, “Dual Wide-Band Checkerboard Surfaces for Radar Cross Section Reduction,” IEEE Trans. Antennas Propagat., Vol. 64, No. 9, September 2016, pp. 4133-4138.

8. M. Askarian Amiri, C. A. Balanis and C. R. Birtcher, “Gain and Bandwidth Enhancement of Spiral Antenna Using Circularly Symmetric HIS,” IEEE Antennas and Wireless Propagation Letters, Vol. 15, 2016.

9. S. Pandi, C. A. Balanis and C. R. Birtcher, “Curvature Modeling in Design of Circumferentially Modulated Cylindrical Metasurface LWA,” IEEE Antennas and Wireless Propagation Letters, Vol. 15, 2016.

Dissertations/Thesis

1. Chen, W., “Radar Cross Section Reduction Using Electromagnetic Band-Gap Checkerboard Surfaces,”
Ph.D., (EE) Dissertation, Arizona State University, December 2016.

2. Pandi, S., “Holographic Metasurface Leaky Wave Antennas,” Ph.D., (EE) Dissertation, Arizona State University,
May 2017.

Conferences

1. M. A. Amiri, C. A. Balanis and C. R. Birtcher, “Gain and Bandwidth Enhancement of Ferrite-Loaded Circular
Cross-Section CBS Antenna,” 2014 IEEE Antennas and Propagation International Symposium,” Memphis, TN,
pp. 1-2, July 6-11, 2014.

2. M. A. Amiri, C. A. Balanis, C. R. Birtcher and A. C. Durgun “Reflection Phase Characterization of a Circularly Symmetric High Impedance Surface,” 2014 IEEE Antennas and Propagation International Symposium,” Memphis, TN, pp. 1-2, July 6-11, 2014.

3. W. Chen and C. A. Balanis, “Bandwidth Enhancement for RCS Reduction using Checkerboard EBG Surfaces,”
16th International Symposium on Antenna Technology and Applied EM (ANTEM),” Victoria, BC, Canada,
pg. 1-2, July 13-17, 2014.

4. S. Pandi and C. A. Balanis, “Antenna Beam Forming Using Holographic Artificial Impedance Surface,”
16th International Symposium on Antenna Technology and Applied EM (ANTEM),” Victoria, BC, Canada,
pg. 1-2, July 13-17, 2014.

5. M. Askarian Amiri, C. A. Balanis and C. R. Birtcher, “Reflection Phase Characterization of Wideband Semi-Periodic Circular High Impedance Surfaces,” 2015 International Conference on Advanced Technologies for Communications (ATC), Ho Chi Minh City, Vietnam, pp. 347-349, October 14-16, 2015.

6. S. Pandi, C. A. Balanis and C. R. Birtcher, Sinusoidally Modulated Metasurface Antenna Excited by Aperture Coupling,” 2015 International Conference on Advanced Technologies for Communications (ATC), Ho Chi Minh City, Vietnam, pp. 355-357, October 14-16, 2015.

7. W. Chen, C. A. Balanis and C. R. Birtcher, “Scattering Control Using Square and Hexagonal Checkerboard Surfaces,” 2015 International Conference on Advanced Technologies for Communications (ATC), Ho Chi Minh City, Vietnam, pp. 358-361, October 14-16, 2015.

8. S. M. Saeed, C. A. Balanis and C. R. Birtcher, ” A Flexible and Reconfigurable Antenna for Wearable Conformal
Applications,” AMTA 37th Annual Meeting & Symposium, Long Beach, California, USA, pp. 1-4,
October 11-16, 2015.

9. M. A. Amiri, C. A. Balanis and C. R. Birther, “Design, Simulation and Antenna Application of Spherical High
Impedance Surfaces,” 2016 IEEE Antennas and Propagation International Symposium,” Fajardo, Puerto Rico, pp. 1911-1912, June 26 -July 1, 2016.

10. M. A. Amiri, C. A. Balanis and C. R. Birther, Applications of Circularly Symmetric High Impedance Surfaces for
Spiral Antennas,” 2016 IEEE Antennas and Propagation International Symposium,” Fajardo, Puerto Rico,
pp. 1913-1914, June 26 -July 1, 2016.

11. S. M. Saeed, C. A. Balanis and C. R. Birther, “Radiation Characteristics of Flexible Reconfigurable Antenna With
Curved Cylindrical Configurations,” 2016 IEEE Antennas and Propagation International Symposium,” Fajardo, Puerto Rico, pp. 1433-1444, June 26 -July 1, 2016.

12. S. M. Saeed, C. A. Balanis and A. C. Durgan, Reflection Phase and Surface Wave Propagation Characteristics of a Symmetrical Perforated High Impedance Surfaces,” 2016 IEEE Antennas and Propagation International Symposium,” Fajardo, Puerto Rico, pp. 1963-1964, June 26 -July 1, 2016.