Former Students
Research and activities achieved in the past several years at ASU could not have been possible without the tireless work of many of my graduate students and associates. Their hard work is recognized in this page by listing their individual contributions and their thesis area.
- Beaty, Kirk Leslie, “Fracture properties of asphalt concrete using modified binders”, Arizona State University, 1993. (with J. Zaniewski)
- Lin, How-ming , “Fracture properties of asphalt-rubber mixtures,” MS Thesis, Arizona State University, 1993. (with M. Mamlouk)
- Devaguptapu, Ravi, “Effect of copper slag on the hydration characteristics, strength, and fracture properties of concrete, MS Thesis, Arizona State University, 1994.
- Sun, C.H., “A Finite Element Model for Simulating Radial Keratotomy and Holmium:YAG Laser Thermokeratoplasty Surgeries”, MS Thesis, Arizona State University, 1994.
- Pagadala, Rajesh, “A finite element model for the design of keratorefractive surgeries,” Arizona State University, 1994.
- Ariño Moreno, Antonio, “A study of copper slag mortar based on durability, strength, and toughness properties,” MS Thesis, Arizona State University, 1996.
- Haupt, G.J., “Mechanical Properties of Cement based composite Laminates, ” MS Thesis, Arizona State University, May, 1997. [download]
- Vodela, Rajashekar, “Evaluation of system components for cold-formed steel and lightweight cement composite,” MS Thesis, Arizona State University, 1999.
- Gouri, Sridevi, “Optimization of Interfacial Zone Characteristics of Fiber-Cement Matrix”, MS Thesis, Arizona State University, 1999. [download]
- Pivacek, A., “Development of a Filament Winding Technique for Manufacturing Cement Based Materials,” MS Thesis, Arizona State University, 2001. [download]
- Mane, Sandeep Anand, “The effect of flyash on the strength and fracture properties of concrete and cement mortar” MS Thesis, Arizona State University, 2001.
- Desai, Tejal, “Mechanical properties of conventional concrete reinforced with alkali-resistant glass fibers”, MS Thesis, Arizona State University, 2001.
- Shah, Rimpal V., “Economical concrete mix designs for highway applications with a high dosage of flyash,” MS Thesis, Arizona State University, May, 2003. [download]
- Lingannagari, Goutham Reddy, “Coefficient of thermal expansion of concrete materials,” MS Thesis, Arizona State University, 2003.
- Sueki, Sachiko, “An analytical and experimental study of fabric-reinforced, cement-based laminated composites” ” MS Thesis, Arizona State University, 2003. [download]
- Singla, Nora , “Experimental and theoretical study of fabric cement composites for retrofitting masonry structures,” M.S. Thesis, Arizona State University, 2004. [download]
- Pahilajani, Jitendra, “Fabric-reinforced, cement-based laminated Composites: an experimental and theoretical study,” M.S. Thesis, Arizona State University, 2004. [download]
- Dnyanesh Naik, “Experimental Analysis Of Fabrics Used In Engine Housing Of Aircrafts”, Master of Science, Arizona State University, August 2005. [download]
- Juan Alfredo Erni, “The Development of Unidirectional and Multidirectional Composite Models Using a Modified Weibull Failure Distribution; Theory, Analysis and Applications,” Nov. 2007. [download]
- Saurabh Kumar Bansal, “The Development of Micro-Mechanical Model of Kevlar Fabrics used in Engine Containment System of Aircrafts,” Nov, 2007. [download]
- Sudheen Anantharaman, “Sulfate And Alkali Silica Resistance of Class C & F Fly Ash Replaced Blended Cements, “ Jan, 2008 [download]
- Sueki, Sachiko, “An analytical and experimental study of fabric-reinforced, cement-based laminated composites” MS Thesis, Arizona State University, 2003. [download, 5.86Mb]
- Singla, Nora , “Experimental and theoretical study of fabric cement composites for retrofitting masonry structures,” M.S. Thesis, Arizona State University, 2004. [download, 1.85 Mb]
- Philajani, Jitendra, “Fabric-reinforced, cement-based laminated Composites: an experimental and theoretical study,” M.S. Thesis, Arizona State University, 2004. [download, 3.18 Mb]
- Dnyanesh Naik, “Experimental Analysis Of Fabrics Used In Engine Housing Of Aircrafts” , Master of Science, Arizona State University,August 2005 [download, 3.93 Mb]
- Juan Alfredo Erni, “The Development of Unidirectional and Multidirectional Composite Models Using a Modified Weibull Failure Distribution; Theory, Analysis and Applications,” Nov. 2007.
- Saurabh Kumar Bansal, “Development of Micro-Mechanical Model of Kevlar Fabrics used in Engine Containment System of Aircrafts,” Nov, 2007.
- Sudheen Anantharaman, “Sulfate And Alkali Silica Resistance of Class C & F Fly Ash Replaced Blended Cements, “ Jan, 2008
- Christopher Barsby, “Toughness Based Analysis and Design of Fiber Reinforced Concrete”, MS Thesis, Arizona State University, Nov. 2011.
- Vikram Dey, “Low Velocity Impact Properties of Sandwich Insulated Panels with Textile – Reinforced Concrete Skin and Aerated Concrete Core”, MS thesis 2012
- Yao, Y., “Application of 2-D Digital Image Correlation (DIC) method to Damage Characterization of Cementitious Composites under Dynamic Tensile Loads” , M.S. Thesis, 2013
- Karan Aswani, “Design procedures for Strain Hardening Cement Composites (SHCC) and measurement of their shear properties by mechanical and 2-D Digital Image Correlation (DIC) method”, 2014
- Robert Kachala, “Early-Age Drying and Cracking Properties of Wollastonite-Textile Reinforced Cement Paste Composites”, M.S. Thesis 2014
- Wang, Xinmeng, M.S., “Analytical Load-Deflection Equations for Beam and 2-D Panel with a Bilinear Moment-Curvature Model, Arizona State University, 2015, 158 pages